Wood Curtain Rods

Wood Curtain Rods | Window treatments will surely change a room with the help of stunning impact and highlighting the views in the window.Sometimes probably the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, and this hardware should be installed correctly and uniformly to ensure drapes and window treatments look superb.

Most window fashions begin with the installation of a curtain-rod, the foundation for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to choose how far out in the window frame you need the rod to stay out, and after that to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or depend upon tapping the wallboard until it does not sound hollow, and discover the stud. Next make certain that the mount is put it to be high enough the curtains will cover the top of the window. Placing the mount above the top of the window by a few inches usually looks better. Hold the begin and use a pencil to mark the location of the bottom screw hole. Then drill an opening in to the wall for that screw. Hold the mount back up and ultizing the drill, squeeze screw inside the bottom of the mount. Level it, and screw inside the top screw.

See also: Target Curtain Liner

Next squeeze finials about the end of the curtain rod when not already attached. Put the curtain-rod into one end of the mount, walk for the other side of the window with the other mount along with the curtain-rod inside your hand. Hold the begin with the curtain rod in it, and ultizing an amount through the top of the rod, boost the mount until it is level with the other side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.