White Sheer Ruffled Priscilla Curtains

White Sheer Ruffled Priscilla Curtains | Window treatments can definitely change an area by having stunning impact and highlighting the views from your window.Sometimes one of the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, and this hardware has to be installed correctly and uniformly to make sure that drapes and window treatments look superb.

Most window fashions begin with the installation of a curtain-rod, the cornerstone for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to choose how far out from your window frame you need the rod to adhere out, and after that to screw within the curtain rod mounts within the closest studs on the window frame. You can use a stud finder, or depend upon tapping the wallboard until it does not sound hollow, to find the stud. Next ensure that the mount is positioned that it is high enough the curtains will handle the top from the window. Placing the mount higher than the top from the window by a few inches usually looks better. Hold the increase and rehearse a pencil to mark the position of the bottom screw hole. Then drill a hole to the wall for the screw. Hold the mount back and ultizing the drill, position the screw within the bottom from the mount. Level it, and screw within the top screw.

See also: Mickey Mouse Curtains Drapes

Next position the finials on the end from the curtain rod when not already attached. Put the curtain-rod into one end from the mount, walk on the opposite side from the window with all the other mount and the curtain-rod with your hand. Hold the increase with all the curtain rod within it, and ultizing an even through the top from the rod, enhance the mount until it is level with all the opposite side. Mark the mount bottom screw hole, and within the same manner as before, screw within the mount.

Remove the curtain rod from your mount. Unscrew one finial and either slide on curtain rings or perhaps the curtain panel. Attach the curtain on the rings if applicable, and hang the curtain rod within the mounts. Measure up from your window frame and out from your window frame the same distance as the first curtain you determine to ensure that all subsequent mounts are equidistant along with your curtains look uniform.