White Polka Dot Sheer Curtains

White Polka Dot Sheer Curtains | Window treatments can definitely change a place by having stunning impact and highlighting the views from the window.Sometimes the most dramatic draperies require installing various types of decorative drapery hardware, and also this hardware have to be installed correctly and uniformly to make sure that draperies look superb.

Most window fashions begin with the installation of a curtain-rod, the basis for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to select how far out from the window frame you want the rod to adhere out, and after that to screw inside the curtain rod mounts inside the closest studs on the window frame. You can use a stud finder, or rely on tapping the wallboard until this doesn’t sound hollow, in order to find the stud. Next ensure that the mount lies that it is high enough the curtains will take care of the top in the window. Placing the mount greater than the top in the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the location of the bottom screw hole. Then drill a dent into the wall for the screw. Hold the mount support and utilizing the drill, squeeze screw inside the bottom in the mount. Level it, and screw inside the top screw.

See also: Curtain Rods For Sidelights

Next squeeze finials about the end in the curtain rod if it is not already attached. Put the curtain-rod into one end in the mount, walk on the other side in the window while using other mount as well as the curtain-rod inside your hand. Hold the mount up while using curtain rod inside it, and utilizing a quantity across the top in the rod, enhance the mount until it’s level while using other side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.

Remove the curtain rod from the mount. Unscrew one finial and either slide on curtain rings or curtain panel. Attach the curtain on the rings if applicable, and hang up the curtain rod inside the mounts. Measure up from the window frame and out from the window frame the same distance because first curtain you determine in order that all subsequent mounts are equidistant as well as your curtains look uniform.