Tropical Sheer Curtains

Tropical Sheer Curtains | Window treatments can really change a place with the addition of stunning impact and highlighting the views from your window.Sometimes probably the most dramatic window treatments require installing various types of decorative drapery hardware, and this hardware must be installed correctly and uniformly to ensure window treatments look superb.

Most window fashions begin with the installation of a curtain-rod, the foundation for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s always best to select how far out from your window frame you need the rod to stick out, then to screw in the curtain rod mounts in the closest studs on the window frame. You can use a stud finder, or depend on tapping the wallboard until it does not sound hollow, to find the stud. Next make certain that the mount is put that it is high enough that the curtains covers the top in the window. Placing the mount higher than the top in the window by a few inches usually looks better. Hold the begin and use a pencil to mark the location of the bottom screw hole. Then drill a hole to the wall for that screw. Hold the mount support and utilizing the drill, place the screw in the bottom in the mount. Level it, and screw in the top screw.

See also: Tier Lattice Curtains

Next place the finials on the end in the curtain rod if it is not already attached. Put the curtain-rod into one end in the mount, walk on the opposite side in the window using the other mount and also the curtain-rod in your hand. Hold the begin using the curtain rod within it, and utilizing a quantity over the top in the rod, raise the mount until it is level using the opposite side. Mark the mount bottom screw hole, and in the same manner as before, screw in the mount.

Remove the curtain rod from your mount. Unscrew one finial and either slide on curtain rings or the curtain panel. Attach the curtain on the rings if applicable, and the curtain rod in the mounts. Measure up from your window frame and out from your window frame exactly the same distance since the first curtain you place so that all subsequent mounts are equidistant plus your curtains look uniform.