Tree Limb Curtain Rod

Tree Limb Curtain Rod | Window treatments really can change an area by having stunning impact and highlighting the views from the window.Sometimes the most dramatic shades require installing various types of decorative drapery hardware, and this hardware should be installed correctly and uniformly to make sure that shades look superb.

Most window fashions begin with installing a curtain-rod, the cornerstone for providing strength to the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to select how far out from the window frame you want the rod to adhere out, then to screw inside curtain rod mounts inside closest studs for the window frame. You can use a stud finder, or depend upon tapping the wallboard until no sound hollow, and discover the stud. Next ensure that the mount is positioned that it is high enough the curtains will cover the top of the window. Placing the mount greater than the top of the window by a few inches usually looks better. Hold the mount up and rehearse a pencil to mark the position of the bottom screw hole. Then drill a hole in the wall to the screw. Hold the mount back and utilizing the drill, put the screw inside bottom of the mount. Level it, and screw inside top screw.

See also: Curtains For Sliding Doors Target

Next put the finials around the end of the curtain rod if it is not already attached. Put the curtain-rod into one end of the mount, walk for the other part of the window while using other mount and the curtain-rod within your hand. Hold the mount up while using curtain rod within it, and utilizing a level over the top of the rod, raise the mount until it can be level while using other part. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.