Shower Stall Curtain Rod

Shower Stall Curtain Rod | Window treatments really can change an area by adding stunning impact and highlighting the views from the window.Sometimes essentially the most dramatic draperies require installing various types of decorative drapery hardware, this also hardware should be installed correctly and uniformly to make sure that draperies look superb.

Most window fashions start with investing in a curtain-rod, the cornerstone for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to choose how far out from the window frame you would like the rod to adhere out, and after that to screw in the curtain rod mounts in the closest studs on the window frame. You can use a stud finder, or count on tapping the wallboard until it doesn’t sound hollow, and locate the stud. Next make sure that the mount is positioned that it is high enough the curtains will take care of the top of the window. Placing the mount above the top of the window by a few inches usually looks better. Hold the increase and make use of a pencil to mark the location of the bottom screw hole. Then drill a dent in the wall for the screw. Hold the mount back and ultizing the drill, place the screw in the bottom of the mount. Level it, and screw in the top screw.

See also: Curtains Grommet Top

Next place the finials around the end of the curtain rod if it’s not already attached. Put the curtain-rod into one end of the mount, walk on the other part of the window while using other mount along with the curtain-rod inside your hand. Hold the increase while using curtain rod inside, and ultizing an amount over the top of the rod, boost the mount until it’s level while using other part. Mark the mount bottom screw hole, and in the same manner as before, screw in the mount.