Sheer Priscilla Curtains

Sheer Priscilla Curtains | Window treatments really can change a space by having stunning impact and highlighting the views in the window.Sometimes essentially the most dramatic window treatments require installing various types of decorative drapery hardware, which hardware must be installed correctly and uniformly to ensure window treatments look superb.

Most window fashions start with the installation of a curtain-rod, the foundation for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to select how far out in the window frame you desire the rod to stick out, after which to screw inside the curtain rod mounts inside the closest studs towards the window frame. You can use a stud finder, or depend upon tapping the wallboard until no sound hollow, and discover the stud. Next make certain that the mount is positioned it to be high enough how the curtains will cover the top of the window. Placing the mount above the top of the window by a few inches usually looks better. Hold the increase and rehearse a pencil to mark the position of the bottom screw hole. Then drill an opening into the wall for that screw. Hold the mount back and ultizing the drill, position the screw inside the bottom of the mount. Level it, and screw inside the top screw.

See also: Angle Curtain Rod

Next position the finials around the end of the curtain rod if it’s not already attached. Put the curtain-rod into one end of the mount, walk towards the opposite side of the window while using other mount along with the curtain-rod in your hand. Hold the increase while using curtain rod inside it, and ultizing a quantity across the top of the rod, boost the mount until it’s level while using opposite side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.

Remove the curtain rod in the mount. Unscrew one finial and either slide on curtain rings or perhaps the curtain panel. Attach the curtain towards the rings if applicable, and place the curtain rod inside the mounts. Measure up in the window frame and out in the window frame the same distance as the first curtain you place so that all subsequent mounts are equidistant and your curtains look uniform.