Sheer Polka Dot Curtains

Sheer Polka Dot Curtains | Window treatments really can change a space with the addition of stunning impact and highlighting the views through the window.Sometimes essentially the most dramatic window treatments require installing various types of decorative drapery hardware, which hardware has to be installed correctly and uniformly to make sure that window treatments look superb.

Most window fashions begin with installing a curtain-rod, the foundation for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s always best to select how far out through the window frame you would like the rod to adhere out, and after that to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or depend on tapping the wallboard until no sound hollow, to find the stud. Next be sure that the mount is put it to be high enough that the curtains will handle the top from the window. Placing the mount higher than the top from the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the positioning of the bottom screw hole. Then drill an opening into the wall for your screw. Hold the mount support and taking advantage of the drill, place the screw inside the bottom from the mount. Level it, and screw inside the top screw.

See also: Sheer Curtains With Designs

Next place the finials for the end from the curtain rod when not already attached. Put the curtain-rod into one end from the mount, walk for the opposite side from the window using the other mount along with the curtain-rod in your hand. Hold the mount up using the curtain rod inside, and taking advantage of a level across the top from the rod, boost the mount until it can be level using the opposite side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.

Remove the curtain rod through the mount. Unscrew one finial and either slide on curtain rings or curtain panel. Attach the curtain for the rings if applicable, and hang up the curtain rod inside the mounts. Measure up through the window frame and out through the window frame the identical distance because the first curtain you determine to ensure that all subsequent mounts are equidistant as well as your curtains look uniform.