Pink Sheer Curtains

Pink Sheer Curtains | Window treatments really can change a room by having stunning impact and highlighting the views through the window.Sometimes the most dramatic window treatments require installing various types of decorative drapery hardware, which hardware should be installed correctly and uniformly to ensure that window treatments look superb.

Most window fashions commence with the installation of a curtain-rod, the cornerstone for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to select how far out through the window frame you need the rod to stay out, and after that to screw inside the curtain rod mounts inside the closest studs on the window frame. You can use a stud finder, or depend on tapping the wallboard until no sound hollow, and locate the stud. Next ensure that the mount is positioned that it is high enough that the curtains will take care of the top in the window. Placing the mount above the top in the window by a few inches usually looks better. Hold the increase and make use of a pencil to mark the location of the bottom screw hole. Then drill an opening to the wall for the screw. Hold the mount backup and utilizing the drill, place the screw inside the bottom in the mount. Level it, and screw inside the top screw.

See also: Scarf Swags Curtains

Next place the finials about the end in the curtain rod when not already attached. Put the curtain-rod into one end in the mount, walk on the opposite side in the window using the other mount along with the curtain-rod with your hand. Hold the increase using the curtain rod inside, and utilizing an even over the top in the rod, boost the mount until it’s level using the opposite side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.

Remove the curtain rod through the mount. Unscrew one finial and either slide on curtain rings or the curtain panel. Attach the curtain on the rings if applicable, and hang the curtain rod inside the mounts. Measure up through the window frame and out through the window frame the same distance as the first curtain you determine to ensure that all subsequent mounts are equidistant along with your curtains look uniform.