Palm Tree Curtain Rods

Palm Tree Curtain Rods | Window treatments can really change a room by having stunning impact and highlighting the views through the window.Sometimes probably the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, and this hardware must be installed correctly and uniformly to make sure that drapes and window treatments look superb.

Most window fashions focus on installing a curtain-rod, the basis for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to choose how far out through the window frame you would like the rod to stick out, and after that to screw within the curtain rod mounts within the closest studs on the window frame. You can use a stud finder, or rely on tapping the wallboard until this doesn’t sound hollow, and locate the stud. Next make sure that the mount is defined it to be high enough that the curtains will cover the top from the window. Placing the mount above the top from the window by a few inches usually looks better. Hold the mount up and employ a pencil to mark the positioning of the bottom screw hole. Then drill a dent into the wall for the screw. Hold the mount backup and taking advantage of the drill, place the screw within the bottom from the mount. Level it, and screw within the top screw.

See also: Decorative Blackout Curtains

Next place the finials on the end from the curtain rod if it is not already attached. Put the curtain-rod into one end from the mount, walk on the opposite side from the window with the other mount as well as the curtain-rod with your hand. Hold the mount up with the curtain rod inside, and taking advantage of a level through the top from the rod, improve the mount until it’s level with the opposite side. Mark the mount bottom screw hole, and within the same manner as before, screw within the mount.