Leopard Sheer Curtains

Leopard Sheer Curtains | Window treatments really can change a space with the help of stunning impact and highlighting the views from the window.Sometimes probably the most dramatic shades require installing various types of decorative drapery hardware, and also this hardware has to be installed correctly and uniformly in order that shades look superb.

Most window fashions begin with the installation of a curtain-rod, the premise for providing strength to the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to choose how far out from the window frame you would like the rod to stay out, after which to screw inside curtain rod mounts inside closest studs towards the window frame. You can use a stud finder, or depend upon tapping the wallboard until it doesn’t sound hollow, to find the stud. Next make certain that the mount lies that it is high enough how the curtains will cover the top of the window. Placing the mount higher than the top of the window by a few inches usually looks better. Hold the mount up and rehearse a pencil to mark the position of the bottom screw hole. Then drill a dent into the wall to the screw. Hold the mount backup and ultizing the drill, position the screw inside bottom of the mount. Level it, and screw inside top screw.

See also: Burnout Velvet Curtains

Next position the finials about the end of the curtain rod if it is not already attached. Put the curtain-rod into one end of the mount, walk towards the opposite side of the window using the other mount along with the curtain-rod in your hand. Hold the mount up using the curtain rod in it, and ultizing a level throughout the top of the rod, improve the mount until it can be level using the opposite side. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.

Remove the curtain rod from the mount. Unscrew one finial and either slide on curtain rings or curtain panel. Attach the curtain towards the rings if applicable, and hang up the curtain rod inside mounts. Measure up from the window frame and out from the window frame exactly the same distance because the first curtain you set to ensure all subsequent mounts are equidistant plus your curtains look uniform.