Kirsch Curtain Rod Brackets | Window treatments can definitely change an area by having stunning impact and highlighting the views through the window.Sometimes essentially the most dramatic window treatments require installing various types of decorative drapery hardware, this also hardware should be installed correctly and uniformly to make sure that window treatments look superb.
Most window fashions start with setting up a curtain-rod, the foundation for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to decide how far out through the window frame you want the rod to adhere out, after which to screw inside curtain rod mounts inside closest studs for the window frame. You can use a stud finder, or depend on tapping the wallboard until no sound hollow, in order to find the stud. Next make certain that the mount is positioned so that it is high enough that this curtains will handle the top of the window. Placing the mount more than the top of the window by a few inches usually looks better. Hold the mount up and employ a pencil to mark the positioning of the bottom screw hole. Then drill a hole in to the wall to the screw. Hold the mount back up and using the drill, put the screw inside bottom of the mount. Level it, and screw inside top screw.
See also: Bright White Blackout Curtains
Next put the finials about the end of the curtain rod if it’s not already attached. Put the curtain-rod into one end of the mount, walk for the opposite side of the window with the other mount along with the curtain-rod within your hand. Hold the mount up with the curtain rod inside it, and using a level throughout the top of the rod, improve the mount until it can be level with the opposite side. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.