Jcpenny Curtain Rods

Jcpenny Curtain Rods | Window treatments will surely change a place by adding stunning impact and highlighting the views through the window.Sometimes the most dramatic shades require installing various types of decorative drapery hardware, and also this hardware must be installed correctly and uniformly to make sure that shades look superb.

Most window fashions focus on setting up a curtain-rod, the basis for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to select how far out through the window frame you would like the rod to stay out, and after that to screw inside curtain rod mounts inside closest studs on the window frame. You can use a stud finder, or count on tapping the wallboard until this doesn’t sound hollow, to find the stud. Next ensure that the mount is defined that it is high enough how the curtains will handle the top of the window. Placing the mount more than the top of the window by a few inches usually looks better. Hold the mount up and rehearse a pencil to mark the position of the bottom screw hole. Then drill an opening in the wall for your screw. Hold the mount back up and taking advantage of the drill, position the screw inside bottom of the mount. Level it, and screw inside top screw.

See also: Sheer Star Curtains

Next position the finials about the end of the curtain rod when not already attached. Put the curtain-rod into one end of the mount, walk on the other side of the window with all the other mount and the curtain-rod in your hand. Hold the mount up with all the curtain rod inside it, and taking advantage of an even over the top of the rod, raise the mount until it’s level with all the other side. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.