Ideas For Hanging Sheer Curtains

Ideas For Hanging Sheer Curtains | Window treatments will surely change a space by having stunning impact and highlighting the views from the window.Sometimes the most dramatic shades require installing various types of decorative drapery hardware, and this hardware should be installed correctly and uniformly to ensure that shades look superb.

Most window fashions begin with setting up a curtain-rod, the cornerstone for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to choose how far out from the window frame you want the rod to adhere out, and after that to screw in the curtain rod mounts in the closest studs towards the window frame. You can use a stud finder, or rely on tapping the wallboard until it does not sound hollow, in order to find the stud. Next make certain that the mount is put that it is high enough that this curtains will cover the top of the window. Placing the mount greater than the top of the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the location of the bottom screw hole. Then drill a dent into the wall for that screw. Hold the mount back and using the drill, squeeze screw in the bottom of the mount. Level it, and screw in the top screw.

See also: Sunbrella Outdoor Curtains Clearance

Next squeeze finials for the end of the curtain rod if it’s not already attached. Put the curtain-rod into one end of the mount, walk towards the other part of the window using the other mount along with the curtain-rod inside your hand. Hold the mount up using the curtain rod inside it, and using a quantity over the top of the rod, raise the mount until it is level using the other part. Mark the mount bottom screw hole, and in the same manner as before, screw in the mount.

Remove the curtain rod from the mount. Unscrew one finial and either slide on curtain rings or perhaps the curtain panel. Attach the curtain towards the rings if applicable, and hang up the curtain rod in the mounts. Measure up from the window frame and out from the window frame the same distance because first curtain you place to ensure all subsequent mounts are equidistant as well as your curtains look uniform.