Hanging Curtain Rod From Ceiling

Hanging Curtain Rod From Ceiling | Window treatments can really change a place with the help of stunning impact and highlighting the views from your window.Sometimes essentially the most dramatic draperies require installing various types of decorative drapery hardware, this also hardware should be installed correctly and uniformly to ensure draperies look superb.

Most window fashions start with setting up a curtain-rod, the foundation for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to decide how far out from your window frame you desire the rod to adhere out, and then to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or rely on tapping the wallboard until it does not sound hollow, in order to find the stud. Next make sure that the mount lies that it is high enough the curtains will handle the top of the window. Placing the mount above the top of the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the positioning of the bottom screw hole. Then drill a dent in the wall for your screw. Hold the mount back up and ultizing the drill, put the screw inside the bottom of the mount. Level it, and screw inside the top screw.

See also: Home Depot Shower Curtain Rod

Next put the finials about the end of the curtain rod when not already attached. Put the curtain-rod into one end of the mount, walk for the far wall of the window with the other mount and also the curtain-rod with your hand. Hold the mount up with the curtain rod inside it, and ultizing an amount throughout the top of the rod, improve the mount until it can be level with the far wall. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.