Double Tension Shower Curtain Rods

Double Tension Shower Curtain Rods | Window treatments can really change a place with the help of stunning impact and highlighting the views from your window.Sometimes one of the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, this also hardware have to be installed correctly and uniformly to ensure that drapes and window treatments look superb.

Most window fashions begin with setting up a curtain-rod, the foundation for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to select how far out from your window frame you want the rod to stay out, then to screw inside the curtain rod mounts inside the closest studs on the window frame. You can use a stud finder, or depend on tapping the wallboard until it does not sound hollow, in order to find the stud. Next be sure that the mount is put it to be high enough that the curtains will cover the top from the window. Placing the mount above the top from the window by a few inches usually looks better. Hold the mount up and employ a pencil to mark the positioning of the bottom screw hole. Then drill a dent into the wall for that screw. Hold the mount support and using the drill, put the screw inside the bottom from the mount. Level it, and screw inside the top screw.

See also: Suction Cup Curtain Rod

Next put the finials about the end from the curtain rod if it’s not already attached. Put the curtain-rod into one end from the mount, walk on the far wall from the window with the other mount along with the curtain-rod inside your hand. Hold the mount up with the curtain rod within it, and using a quantity through the top from the rod, enhance the mount until it really is level with the far wall. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.