Curtain Rods Antique Gold

Curtain Rods Antique Gold | Window treatments really can change a place by having stunning impact and highlighting the views in the window.Sometimes essentially the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, which hardware must be installed correctly and uniformly to ensure that drapes and window treatments look superb.

Most window fashions start with installing a curtain-rod, the basis for providing strength to the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to decide how far out in the window frame you would like the rod to stick out, then to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or count on tapping the wallboard until this doesn’t sound hollow, in order to find the stud. Next make certain that the mount is put it to be high enough that the curtains will cover the top in the window. Placing the mount greater than the top in the window by a few inches usually looks better. Hold the increase and employ a pencil to mark the location of the bottom screw hole. Then drill a hole to the wall to the screw. Hold the mount back and using the drill, put the screw inside the bottom in the mount. Level it, and screw inside the top screw.

See also: Rv Shower Curtain Rod

Next put the finials on the end in the curtain rod if it is not already attached. Put the curtain-rod into one end in the mount, walk for the other part in the window with the other mount along with the curtain-rod in your hand. Hold the increase with the curtain rod inside it, and using an amount across the top in the rod, raise the mount until it can be level with the other part. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.