Curtain Rod Brackets Without Nails

Curtain Rod Brackets Without Nails | Window treatments really can change an area with the help of stunning impact and highlighting the views through the window.Sometimes essentially the most dramatic draperies require installing various types of decorative drapery hardware, and also this hardware must be installed correctly and uniformly in order that draperies look superb.

Most window fashions start with investing in a curtain-rod, the cornerstone for providing strength to the valence, curtain, sheer, or drapery. When installing a curtain rod, it is best to choose how far out through the window frame you need the rod to adhere out, after which to screw inside curtain rod mounts inside closest studs towards the window frame. You can use a stud finder, or depend upon tapping the wallboard until it doesn’t sound hollow, to find the stud. Next be sure that the mount is put it to be high enough that the curtains will cover the top from the window. Placing the mount greater than the top from the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the positioning of the bottom screw hole. Then drill a dent in the wall to the screw. Hold the mount back up and ultizing the drill, put the screw inside bottom from the mount. Level it, and screw inside top screw.

See also: Grommet Patio Curtain

Next put the finials on the end from the curtain rod when not already attached. Put the curtain-rod into one end from the mount, walk towards the far wall from the window with all the other mount as well as the curtain-rod in your hand. Hold the mount up with all the curtain rod inside it, and ultizing an amount through the top from the rod, boost the mount until it is level with all the far wall. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.