Corner Shower Stall Curtain Rod

Corner Shower Stall Curtain Rod | Window treatments can really change a room with the help of stunning impact and highlighting the views from the window.Sometimes probably the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, this also hardware has to be installed correctly and uniformly to make sure that drapes and window treatments look superb.

Most window fashions start with setting up a curtain-rod, the premise for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s always best to choose how far out from the window frame you desire the rod to stay out, after which to screw within the curtain rod mounts within the closest studs to the window frame. You can use a stud finder, or depend upon tapping the wallboard until this doesn’t sound hollow, to find the stud. Next ensure that the mount is positioned that it is high enough the curtains will take care of the top in the window. Placing the mount greater than the top in the window by a few inches usually looks better. Hold the increase and use a pencil to mark the position of the bottom screw hole. Then drill a hole into the wall to the screw. Hold the mount backup and using the drill, position the screw within the bottom in the mount. Level it, and screw within the top screw.

See also: Striped Outdoor Curtains

Next position the finials for the end in the curtain rod if it’s not already attached. Put the curtain-rod into one end in the mount, walk to the other side in the window while using other mount as well as the curtain-rod with your hand. Hold the increase while using curtain rod inside it, and using an even over the top in the rod, boost the mount until it can be level while using other side. Mark the mount bottom screw hole, and within the same manner as before, screw within the mount.