Copper Pipe Curtain Rod | Window treatments can really change a room by having stunning impact and highlighting the views from the window.Sometimes essentially the most dramatic draperies require installing various types of decorative drapery hardware, and this hardware should be installed correctly and uniformly in order that draperies look superb.
Most window fashions start with installing a curtain-rod, the premise for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to choose how far out from the window frame you want the rod to stay out, and after that to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or depend on tapping the wallboard until this doesn’t sound hollow, in order to find the stud. Next make sure that the mount is defined it to be high enough the curtains will handle the top of the window. Placing the mount above the top of the window by a few inches usually looks better. Hold the mount up and employ a pencil to mark the positioning of the bottom screw hole. Then drill a dent to the wall to the screw. Hold the mount back up and ultizing the drill, place the screw inside the bottom of the mount. Level it, and screw inside the top screw.
See also: Dragon Curtain Rods
Next place the finials on the end of the curtain rod when not already attached. Put the curtain-rod into one end of the mount, walk for the opposite side of the window while using other mount along with the curtain-rod within your hand. Hold the mount up while using curtain rod within it, and ultizing a level across the top of the rod, improve the mount until it really is level while using opposite side. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.