Center Support For Curtain Rod

Center Support For Curtain Rod | Window treatments will surely change a space by having stunning impact and highlighting the views through the window.Sometimes essentially the most dramatic drapes and window treatments require installing various types of decorative drapery hardware, this also hardware must be installed correctly and uniformly to make sure that drapes and window treatments look superb.

Most window fashions begin with setting up a curtain-rod, the basis for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s best to decide how far out through the window frame you would like the rod to stick out, and then to screw in the curtain rod mounts in the closest studs towards the window frame. You can use a stud finder, or depend upon tapping the wallboard until it doesn’t sound hollow, to find the stud. Next ensure that the mount is positioned so that it is high enough that the curtains will cover the top with the window. Placing the mount greater than the top with the window by a few inches usually looks better. Hold the increase and employ a pencil to mark the positioning of the bottom screw hole. Then drill an opening into the wall for your screw. Hold the mount support and utilizing the drill, squeeze screw in the bottom with the mount. Level it, and screw in the top screw.

See also: Sheer Country Curtains

Next squeeze finials about the end with the curtain rod if it’s not already attached. Put the curtain-rod into one end with the mount, walk towards the other part with the window while using other mount along with the curtain-rod inside your hand. Hold the increase while using curtain rod in it, and utilizing a level over the top with the rod, raise the mount until it’s level while using other part. Mark the mount bottom screw hole, and in the same manner as before, screw in the mount.