Canopy Curtain Rods

Canopy Curtain Rods | Window treatments will surely change a place by adding stunning impact and highlighting the views from the window.Sometimes probably the most dramatic shades require installing various types of decorative drapery hardware, which hardware should be installed correctly and uniformly to ensure shades look superb.

Most window fashions commence with investing in a curtain-rod, the cornerstone for supporting the valence, curtain, sheer, or drapery. When installing a curtain rod, it’s always best to select how far out from the window frame you want the rod to adhere out, after which to screw inside curtain rod mounts inside closest studs on the window frame. You can use a stud finder, or depend upon tapping the wallboard until this doesn’t sound hollow, in order to find the stud. Next make sure that the mount is positioned it to be high enough the curtains will take care of the top of the window. Placing the mount greater than the top of the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the location of the bottom screw hole. Then drill a hole in to the wall to the screw. Hold the mount back up and ultizing the drill, put the screw inside bottom of the mount. Level it, and screw inside top screw.

See also: Tension Curtain Rods Home Depot

Next put the finials for the end of the curtain rod if it’s not already attached. Put the curtain-rod into one end of the mount, walk on the far wall of the window using the other mount and the curtain-rod within your hand. Hold the mount up using the curtain rod inside, and ultizing a level over the top of the rod, enhance the mount until it is level using the far wall. Mark the mount bottom screw hole, and inside same manner as before, screw inside mount.