Arched Curtain Rod

Arched Curtain Rod | Window treatments will surely change a room with the help of stunning impact and highlighting the views through the window.Sometimes one of the most dramatic draperies require installing various types of decorative drapery hardware, which hardware has to be installed correctly and uniformly in order that draperies look superb.

Most window fashions focus on installing a curtain-rod, the premise for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to select how far out through the window frame you need the rod to stay out, and after that to screw inside the curtain rod mounts inside the closest studs for the window frame. You can use a stud finder, or count on tapping the wallboard until this doesn’t sound hollow, to find the stud. Next be sure that the mount is positioned that it is high enough that this curtains will take care of the top of the window. Placing the mount higher than the top of the window by a few inches usually looks better. Hold the mount up and rehearse a pencil to mark the location of the bottom screw hole. Then drill a dent in the wall to the screw. Hold the mount back up and using the drill, place the screw inside the bottom of the mount. Level it, and screw inside the top screw.

See also: Curtains For Patios

Next place the finials for the end of the curtain rod when not already attached. Put the curtain-rod into one end of the mount, walk for the far wall of the window while using other mount and the curtain-rod in your hand. Hold the mount up while using curtain rod inside it, and using a quantity over the top of the rod, raise the mount until it’s level while using far wall. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.