Texas Star Curtain Rods | Window treatments really can change a room with the addition of stunning impact and highlighting the views through the window.Sometimes essentially the most dramatic draperies require installing various types of decorative drapery hardware, and this hardware must be installed correctly and uniformly in order that draperies look superb.
Most window fashions start with installing a curtain-rod, the basis for providing strength to the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to choose how far out through the window frame you desire the rod to stay out, and after that to screw inside the curtain rod mounts inside the closest studs towards the window frame. You can use a stud finder, or depend upon tapping the wallboard until no sound hollow, and discover the stud. Next make certain that the mount is defined so that it is high enough that this curtains will handle the top with the window. Placing the mount higher than the top with the window by a few inches usually looks better. Hold the mount up and use a pencil to mark the location of the bottom screw hole. Then drill a dent into the wall to the screw. Hold the mount back up and using the drill, put the screw inside the bottom with the mount. Level it, and screw inside the top screw.
See also: Diy Pull Up Curtains
Next put the finials on the end with the curtain rod if it is not already attached. Put the curtain-rod into one end with the mount, walk towards the other part with the window with the other mount and the curtain-rod within your hand. Hold the mount up with the curtain rod inside, and using a level across the top with the rod, boost the mount until it really is level with the other part. Mark the mount bottom screw hole, and inside the same manner as before, screw inside the mount.