Curtain Rod Close To Ceiling

Curtain Rod Close To Ceiling | Window treatments can definitely change a space by adding stunning impact and highlighting the views in the window.Sometimes probably the most dramatic shades require installing various types of decorative drapery hardware, and this hardware should be installed correctly and uniformly to ensure that shades look superb.

Most window fashions focus on installing a curtain-rod, the premise for holding up the valence, curtain, sheer, or drapery. When installing a curtain rod, it is advisable to decide how far out in the window frame you want the rod to stick out, then to screw within the curtain rod mounts within the closest studs on the window frame. You can use a stud finder, or rely on tapping the wallboard until it does not sound hollow, in order to find the stud. Next make sure that the mount is put that it is high enough that this curtains will cover the top with the window. Placing the mount above the top with the window by a few inches usually looks better. Hold the begin and use a pencil to mark the position of the bottom screw hole. Then drill a dent to the wall to the screw. Hold the mount back and ultizing the drill, put the screw within the bottom with the mount. Level it, and screw within the top screw.

See also: Damask Blackout Curtain

Next put the finials on the end with the curtain rod if it is not already attached. Put the curtain-rod into one end with the mount, walk on the opposite side with the window with the other mount and also the curtain-rod with your hand. Hold the begin with the curtain rod in it, and ultizing an amount across the top with the rod, improve the mount until it can be level with the opposite side. Mark the mount bottom screw hole, and within the same manner as before, screw within the mount.